Casella-cel CEL-393 Manual do Utilizador Página 24
- Página / 99
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
Function 9F is described in Chapter 9, whilst 8F duplicates the single
operation of the C key. The sequence 7F is only valid when the instru-
ment is in the event mode.
Clock
This key is used for all time functions. Operation of the key alone results
in the display of time functions in sequence, whilst preceeding it with a
number will enter new time information. The procedure for reading the
time information is therefore a sequence of operations of the C key alone
as follows.
1st operation of C key displays the main clock (real or elapsed
time),
2nd operation of C key displays selected period time,
3rd operation of C key displays time left in current period,
4th operation of C key displays selected delayed start time.
Subsequent operation of the C key will return to the main clock, and allow
the sequence to be run through again.
The default time settings at switch on are.
0 hours 00 minutes for the main clock, to allow a display of
elapsed time from switch on,
9999 minute period time, giving event mode of data storage
with no defined state for the elapsed time display but with the
delay time flag set off to allow the microprocessor access to
the memory for its computed results.
In order to set any of the time functions to other values the following
procedure should be followed.
/20.
393 Handbook
- Discontinued Instrument 1
- Contents Page 3
- Contents (Continued) Page 4
- 1. INTRODUCTION 5
- 2 SCHEDULE OF PARTS 9
- 393 Handbook 14
- 3. PREPARATION FOR USE 15
- 4.2 Display 30
- 4.3 Interpretation of Results 33
- Event and current maximum 37
- Event maximum 37
- 4.4 Auxiliary Outputs 39
- 4.5 Auxiliary Input 41
- 5.1 Introduction 43
- 5.2 Frequency Analyser 44
- 5.2.1 Controls 44
- 5.2.2 Operation 46
- 5.3 Digital Interface 52
- 5.3.1 Introduction 52
- Computers 52
- Microcomputer 55
- 5.4 Memory Configuration 62
- 5.5 Retrofitting Procedure 62
- Figure 9 Retrofit of filter 63
- 393 Handbook /59 63
- 6 SAMPLE OPERATIONS 65
- 6.1 Profile Mode 65
- 6.2 Environmental Mode 67
- 6.3 Event Mode 70
- 6.4 Frequency Analysis Mode 73
- 7 DEFAULT CONDITIONS 77
- 8 CALIBRATION PROCEDURE 79
- 8.1 Introduction 79
- 8.3 Pistonphone Calibration 83
- SUPPLIES 87
- 10 SPECIFICATION 89
- WARRANTY ARRANGEMENTS 95
- Return Information 97
Manuais e produtos relacionados com Instrumentos de medida Casella-cel CEL-393
Instrumentos de medida Casella-cel Vortex Ultraflow area sampling pump Manual do Utilizador
(12 páginas)
(12 páginas)
(1 páginas)
Instrumentos de medida Casella-cel Environmental enclosure for Microdust Manual do Utilizador
(10 páginas)
(10 páginas)
Instrumentos de medida Casella-cel Sampling heads for personal dust sampling Manual do Utilizador
(32 páginas)
(32 páginas)
Bosch HGS445UC-01 Handbücher
Bedienungsanleitungen und Benutzerhandbücher für Herde Bosch HGS445UC-01.
Wir stellen 1 PDF-Handbücher Bosch HGS445UC-01 zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Spezifikationen
Comentários a estes Manuais